 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| REFRIGERATION OIL | |
| ESTER REFRIGERANT OIL | |
 |
|
| Typical Projects | Test method | LUBIL |
LUBIL |
LUBIL S-22 |
LUBIL S-32 |
LUBIL S-46 |
LUBIL S-68 |
LUBIL S-100 |
| Density 15?Cg/cm³ | ASTM | 0.928 | 0.940 | 0.951 | 0.956 | 0.958 | 0.960 | 0.970 |
| Color ASTM | ASTM D 1500 | LO.5 | LO.5 | LO.5 | LO.5 | LO.5 | LO.5 | LO.5 |
| Viscosity 40?Cmm³/s | ASTM D445 |
10.1 | 15.0 | 22.5 | 32.30 | 44.8 | 66.6 | 99.2 |
| Viscosity 100?Cmm³/s | ASTM D92 | 2.5 | 3.22 | 4.14 | 5.14 | 6.9 | 8.22 | 10.2 |
| Flash point COC?C | ASTM D92 | 182 | 196 | 212 | 230 | 240 | 254 | 254 |
Pour Point?C |
ASTM D97 | -50the following | -50the following | -50the following | -35 | -35 | -40 | -40 |
| Acid plant au/ue mgKOH/g | ASTM D | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| mgKOH/g | 974 | |||||||
| Water ppm | ADTM D4928 |
35 | 35 | 35 | 35 | 35 | 35 | 35 |
|
| 1. USE | - | It is in the refrigerator, freezer, freezer refrigeration system to give full play to the best performance of the high-level syntheses of frozen oil. |
| - | It is most appropriate in the HFC refrigerant (R134A,R404A and R407, and R410A) of the aircraft. | |
| - | Choice of viscosity range: ISO CG10-CG100 | |
| 2. FEATURES | - | It is based on synthetic esters (POE) as the base oil, and refrigerant R134A,R404A has good compatibility. |
| - | Has Excellent lubricity, chemical stability, resistance to water decomposition stability and low temperature fluidity… Therefore, the use of refrigeration system performance can be maintained long-term stability. | |
| - | Packing supplies: 1L, 3.78L, 20L, 200L drums. |
| MINERAL REFRIGERANT OIL |
| Typical Projects | Test method | LUBIL 1 GS |
LUBIL 2 GS |
LUBIL 3 GS | LUBIL 4 GS | LUBIL 5 GS |
| Density 15?Cg/cm³ | ASTMD 1250 | 0.928 | 0.940 | 0.951 | 0.956 | 0.958 |
| Color ASTM | ASTMD 1500 | LO.5 | LO.5 | LO.5 | LO.5 | LO.5 |
| Viscosity 40?Cmm³/s | ASTMD 445 |
12.3 | 18.9 | 29.5 | 54.9 | 94.6 |
| Viscosity 100?Cmm³/s | ASTMD 445 | 2.70 | 3.44 | 4.31 | 5.97 | 7.78 |
| Flash point COC?C | ASTMD 92 | 160 | 168 | 178 | 188 | 208 |
Pour Point?C |
ASTMD 97 | -47.5 | -45 | -40 | -35 | -27.5 |
| Total Acid Number | ASTMD 974 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| Aniline Point ?C | ASTMD 611 | 72.8 | 73.5 | 75.4 | 79.8 | 80.4 |
| Moisture ppm | ASTMD 4928 |
20 | 20 | 20 | 20 | 20 |
| Flocculation point ?C | ANS1/ASHRAE86 | -53 | -54 | -55 | -46 | -35 |
|
| 1. USE | - |
|
| - | It is most suitable for HCFC refrigerants (R22.R502), the natural refrigerant (R600A,R717,R290) and the CFC refrigerant (R12) of the aircraft. | |
| - | Viscosity range for use: ISO VG12-VG100 | |
| - | Can be applied to reciprocating, rotary, scroll, screw-type compressor and turbine type, etc. | |
| 2. FEATURES | - | It is the selection of environment-based oil specially refined approach, and has excellent lubricity, chemical stability, good low temperature properties and refrigerant Township capacitive. Therefore, the use of these cooling system performance can be maintained long-term stability. |
| Packing supplies: | - |
|
| TEL: 016 981 8957/8 | FAX: 016 981 8956 | EMAIL:reco@cyberserv.co.za | |
